Amp Remote Switch w/ Led’s
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=65597
Printed Date: May 29, 2024 at 1:17 AM
Topic: Amp Remote Switch w/ Led’s
Posted By: cdnref
Subject: Amp Remote Switch w/ Led’s
Date Posted: November 04, 2005 at 11:33 AM
Hello all, I was wondering if what I have drawn up is possible. Just basically, when I have my amp on(toggle swicth) that a led will show, and when I turn the switch off to turn the amp off, that another led will show that the amp is off,but still have the deck playing. So basically swicth the amp on/off. And if so What value of Resister/Diodes do I need.
Replies:
Posted By: cowboy21
Date Posted: November 04, 2005 at 4:10 PM
yeah that would work, just there is a good chance you get feedback of somekind, you will need a 390 ohms resistor ( for a 2.6v - 4.2v led) but not sure about the diode
-------------
modest yet effective... ECLIPSE 12", Venom 8"x2, Focal 5 1/2" comp.,Response amps x2 (580WRMS total @ 4Ohms), Pioneer TFT + DVD, good for 148.7dB
Posted By: cdnref
Date Posted: November 07, 2005 at 5:51 AM
k thanks. anyone know for the diode?
Posted By: cdnref
Date Posted: November 08, 2005 at 7:29 PM
Do I have to add a transistor on the D1 Line to maintain a 12V or will the 9 volts (approx) be enought to turn on the amp? I can post a pic if needed!
Posted By: cowboy21
Date Posted: November 10, 2005 at 4:07 AM
nah it should be sweet ------------- modest yet effective... ECLIPSE 12", Venom 8"x2, Focal 5 1/2" comp.,Response amps x2 (580WRMS total @ 4Ohms), Pioneer TFT + DVD, good for 148.7dB
Posted By: cdnref
Date Posted: November 14, 2005 at 11:30 AM
I was told today that the amp needed a constant 12v on the remote. Is this correct?
|
