pedals and neon wiring
Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68425
Printed Date: May 16, 2024 at 1:23 PM
Topic: pedals and neon wiring
Posted By: jlord16
Subject: pedals and neon wiring
Date Posted: December 15, 2005 at 6:36 AM
I currently have a 12" neon stick in my car and i just aquired some of those so called "racing" pedals that have some sort of LED lights in them. My question is how can i wire both of these items. I tried to wire the pedals into the power and ground wire which runs from the factory harness into the harnees for my HU but wen i turn the car on accessories the pedals hardly even light up. The neon currently runs off the cig lighter socket. Whst the best way to wire both of these so that they only operate wen the car is turend on?
-------------
Clarion DB36MP
Infinity Kappa Perfect 10"
Respone 800w Mono
ALPINE MRP-F250
*Custom fabrications*
Replies:
Posted By: cowboy21
Date Posted: December 15, 2005 at 7:49 AM
take a pedal off and try connecting it straight to the battery to see what difference it makes, if it is a rather big difference, check the power source in which u have tapped into and also double check the grounding position, u can connect the light to ur accessories wire that turnes the head unit on, that should be enough to power them
-------------
modest yet effective... ECLIPSE 12", Venom 8"x2, Focal 5 1/2" comp.,Response amps x2 (580WRMS total @ 4Ohms), Pioneer TFT + DVD, good for 148.7dB
|