12 inch neon wiring problem in car

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=68458
Printed Date: June 09, 2024 at 5:55 PM

Topic: 12 inch neon wiring problem in car

Posted By: kundi13
Subject: 12 inch neon wiring problem in car
Date Posted: December 15, 2005 at 5:03 PM

hi, ive got two 12 inch neons. its got a red +ve and black -ve output wires and also a switch. im having difficulties in wiring them so can anyone help me where to wire them up in the car?

-------------
kundi

Replies:

Posted By: ss-installer
Date Posted: December 15, 2005 at 8:33 PM

run a fused wire from a power source (battery or key switch) to the toggle. from the toggle to each positive on lights. ground each negative to the car body.

-------------

Posted By: coppellstereo
Date Posted: December 16, 2005 at 4:28 AM

perfect.

-------------

Posted By: kundi13
Date Posted: December 17, 2005 at 8:56 AM

i didnt not do that way. i just connected it to the cigeratte lighter , connected the positve and the negative to the cigeratte lighter, is that ok becuase its working fine?

-------------
kundi

Posted By: hugity
Date Posted: December 17, 2005 at 9:23 PM

kundi13 wrote:

i didnt not do that way. i just connected it to the cigeratte lighter , connected the positve and the negative to the cigeratte lighter, is that ok becuase its working fine?

i did that with my cathodes and it works fine. its great because the wires to the cigarette lighter are already fused (mine is 25 amps which is more than enough) so yeah, you're good.

Print Page | Close Window