Wiring Sreetglow lightbar

Printed From: the12volt.com
Forum Name: Lights, Neon, LEDs, HIDs
Forum Discription: Under Car Lighting, Strobe Lights, Fog Lights, Headlights, HIDs, DRL, Tail Lights, Brake Lights, Dashboard Lights, WigWag, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77370
Printed Date: June 10, 2024 at 12:40 PM

Topic: Wiring Sreetglow lightbar

Posted By: rcgait1
Subject: Wiring Sreetglow lightbar
Date Posted: May 06, 2006 at 3:45 PM

I am trying to wire a some streetglow lightbars. I have a 3 prong rocker switch with Pos Aux and Neg but it does not seem to control the lights. The lights remain on but the switch will turn on and off as expected. The light bars stay on even when the switch is off. Tlightbars orignally came with a cigarette lighter plug that I cut off. How do Iwire this correctly so that the switch will turn off the lightbars or do I need something else along with the switch.

Replies:

Posted By: pyro_527
Date Posted: May 06, 2006 at 4:37 PM

typically you would feed B+ on the middle prong, neg to ground and the other to your equipment. Is this a lighted switch?

-------------
Dopeler effect: The tendency of stupid ideas to seem smarter when they come to you quicker....

Posted By: rcgait1
Date Posted: May 06, 2006 at 5:15 PM

Yeap its the lighted one. I figured it out. Have to go get an inline fuse probabaly 5A or 10A to finish the job.

Print Page | Close Window