Print Page | Close Window

jbl crossover and amp for solobaric

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105998
Printed Date: October 31, 2024 at 6:14 PM


Topic: jbl crossover and amp for solobaric

Posted By: ropey man
Subject: jbl crossover and amp for solobaric
Date Posted: July 08, 2008 at 8:28 PM

OK folks, here are my little dilemmas. I have a pair of JBL GTO505C components, but I only have one of the two cross-overs. I tried to get a hold of JBL and get some info about getting a new cross-over, but they want $65 for a new one. I don't think so. I have the values of the capacitors, i just need the values of the two inductors so that I can make new crossovers for probably around $10-20 bucks instead.

My second question is, since you all have a good knowledge of what works together, what do you recommend to power a single 12" solobaric L7 dual 2 ohm. the reason i bought the dual two is because right now I just have a kicker KX400.2 to run it, so i needed a sub that I can run at 4 ohms. I would like a decent 1 ohm stable amp that wont break the bank. your opinions would be greatly appreciated.



Replies:

Posted By: bigbev
Date Posted: July 08, 2008 at 8:44 PM

I have an autotek ss1900.1d, and its the best amp ive ever owned.  its rated at 1900 watts rms at 1 ohm. and i think you can get one for about 360 dollars at online

I have it pushing 2 15 inch kicker cvr's in a custom box and it cracking my front windsheild.






Print Page | Close Window