Print Page | Close Window

switched ignition in a 2003 suburban

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108121
Printed Date: October 31, 2024 at 6:42 PM


Topic: switched ignition in a 2003 suburban

Posted By: jfinks
Subject: switched ignition in a 2003 suburban
Date Posted: October 12, 2008 at 8:38 PM

The 2003 subyrban has a class serial data lead at the radio so where is the easiest place to get ignition with out setting off the air bags?



Replies:

Posted By: megaman
Date Posted: October 12, 2008 at 10:39 PM

Orange or Brown at the ignition harness.  They are the accessory wires for the ignition.





Posted By: jmsounds
Date Posted: October 13, 2008 at 3:51 PM
it's the brown wire at the ignition harness but remember to use fuse close to harness so you don't burn anything  plus is safer




Posted By: tcss
Date Posted: October 13, 2008 at 7:38 PM
Jack, don't you have some of those Metra adaptors? Or do I still have them? I believe you need a GMOS-01.

-------------
There is no such thing as free installation!




Posted By: jfinks
Date Posted: October 13, 2008 at 10:12 PM
I gave you all the metra stuff I bought a swi-jack for the stering controls but the data lead would be nice Bob if you have one...




Posted By: tcss
Date Posted: October 13, 2008 at 11:45 PM
No sweat, I'll bring you one when I see you next.

-------------
There is no such thing as free installation!





Print Page | Close Window