Print Page | Close Window

how to bypass the alpine iva w505

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110233
Printed Date: May 17, 2024 at 6:12 PM


Topic: how to bypass the alpine iva w505

Posted By: nitrob
Subject: how to bypass the alpine iva w505
Date Posted: January 01, 2009 at 5:53 PM

I could not find any info on the site on how to bypass the Alpine IVA-W505 park brake and foot brake wires so I figured I would ask.  I am installing this unit in a 09 Mustang GT for someone and everything is done except for geting the DVD to work.  The diagram from Alpine is not the greatest.  I have read about the PAC TR7 bypass but he did not purchase this and I wanted to just use a toggle switch.  What wires need to go where for this to work.  There is the yellow w/black stripe wire and yellow w/blue stripe wire.  Which one goes to ground and which one to plus on which switches.  This is an awesome unit and I want to get this thing working correctly.  I do want to bypass the foot brake and e-brake setup.

Regards,

Charles a.k.a. NitroB




Replies:

Posted By: ragsports
Date Posted: January 01, 2009 at 5:59 PM
This cannot be done it is illegal to install it in the way you wish to. 



Posted By: nitrob
Date Posted: January 01, 2009 at 6:04 PM
I am aware of this.  I am in Germany and it does not matter here.  If I can not use a switch then I will have to order the PAC TR7.


Print Page | Close Window