my pioneer premier amp is not working

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113181
Printed Date: June 15, 2024 at 6:03 PM

Topic: my pioneer premier amp is not working

Posted By: mesooohorny
Subject: my pioneer premier amp is not working
Date Posted: April 15, 2009 at 9:53 PM

Hello-
My amp stopped working after 1 of the speaker wires shorted together on 1 of the speakers. The amp powers up (light turns on), but there is no sound coming from this 1-channel amp (Pioneer Premier PRS-D3000SPL). I opened up the amp, and I didn't find any interal burnt fuses.
Help me Obi-Wan!
Burnt Toast-

Replies:

Posted By: i am an idiot
Date Posted: April 15, 2009 at 9:59 PM

Did the amp smoke? Some amps will light up with only remote and ground. Did you verify with a meter that the amp was getting voltage on the power terminal of the amp.

Posted By: DYohn
Date Posted: April 15, 2009 at 9:59 PM

You "opened up the amp"? I assume it was not under warranty? Did any of the fuses blow?

-------------
Support the12volt.com

Posted By: mesooohorny
Date Posted: April 15, 2009 at 10:02 PM

no i didn't verify voltage, but the speakers do work.

Posted By: i am an idiot
Date Posted: April 15, 2009 at 10:03 PM

If you have an AGU type fuse anywhere in the power wire going to that amp, replace it even if it looks good.

Posted By: mesooohorny
Date Posted: April 15, 2009 at 10:06 PM

there are no blown fuses. i heard a "pop" soound like a fuse blew. there was no smoke.

Posted By: i am an idiot
Date Posted: April 16, 2009 at 7:44 PM

Have you checked voltage yet?

Posted By: mesooohorny
Date Posted: April 16, 2009 at 9:14 PM

check the voltage going to the amp or?

Print Page | Close Window