Print Page | Close Window

1997 plymouth voyager stereo wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116435
Printed Date: April 26, 2024 at 3:07 AM


Topic: 1997 plymouth voyager stereo wiring

Posted By: thinkdigital
Subject: 1997 plymouth voyager stereo wiring
Date Posted: September 20, 2009 at 2:28 PM

I was working on the stereo wiring in a 1997 Plymouth Voyager the other day, using the color codes off this page:
https://www.the12volt.com/installbay/stereodetail/1829.html
The color code for + 12V Constant is incorrect, +12V constant is pink, not orange. I just thought I'd point out and/or verify this.

If I posted in the wrong place, let me know.

Thank you.



Replies:

Posted By: tommy...
Date Posted: September 21, 2009 at 12:17 AM
Yeah...You'll get that sometimes...! Always check w/ your meter ...Which it sounds like you did...! ORRRRRRR... If the harness was still intact,then the picture below is for you...If it was cut...You could take a peek at pin position...!
 
 
Metra Electronics Corp. - 70-1817
posted_image
posted_image

Description

Chrysler/Plymouth/Jeep/Dodge 1985-Up - Into Car

Product Specifications

  • Plugs into car harness at radio
  • Power and 4/Speaker
  • 2 eight pin connectors

Allows installation of an aftermarket radio using the existing factory wiring and connectors. No cutting of factory wiring is needed.



-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!


Print Page | Close Window