Avalanche stock stereo Help
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12012
Printed Date: June 03, 2024 at 2:28 AM
Topic: Avalanche stock stereo Help
Posted By: JaredSimpson
Subject: Avalanche stock stereo Help
Date Posted: April 09, 2003 at 6:15 PM
I recently installed an Arc Audio Kar series amplifire into a 2003 Avalanche(I used the amps high level inputs) and all was well then nothing no sound at all all I hear is a quiet thunk when I turn the volume all the way down can anyone help thanks PS the amp is pushing 4 Arc Audio 12" woofers
Replies:
Posted By: bberman1
Date Posted: April 10, 2003 at 9:45 AM
Where are you getting the input signal from?
Posted By: Velocity Motors
Date Posted: April 10, 2003 at 7:58 PM
Where are you getting the remote turn on lead from ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: mark241
Date Posted: April 18, 2003 at 6:53 PM
You may need to try using a high to low level converter and then connect through RCA. I had a similar problem with the original head unit, new amp, with engine noise that increased as you reved up in an 03' Avalanche. Your problem may be different however, the converter solved the problem in out case.
Posted By: dyer
Date Posted: May 17, 2003 at 9:06 AM
I have a 4-ch rf modulator hooked up to my rear speakers and everything works beautifully!
-------------
Dyer
|