symbilink balanced cables
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120683
Printed Date: June 09, 2024 at 11:08 PM
Topic: symbilink balanced cables
Posted By: nodiggie
Subject: symbilink balanced cables
Date Posted: March 12, 2010 at 11:01 AM
I dug up an older topic that answered my initial question.
(I could just poke my head and take a good look at the balanced line inputs on each amp.)
Will I need any type of adapter from OEM Symbilink to fit my NON-Zapco sub amp? The amp has a balanced line input. I understand the magic is in the cable itself and not the connection? Just need some wisdom so I can be certain.
Thanks all, this forum ROCKS !
-------------
Still learning
Kraco
Replies:
Posted By: ianarian
Date Posted: March 12, 2010 at 11:21 PM
I custom fabricated a s-video cable to stereo rca to make this adapter....Once upon a time these adapter's were selling for $30 bux a pop. I know it all about patching anything to anything. You have me confused about your question bro! Have I drank too much?
-------------
This is what I do for FUN!
Posted By: nodiggie
Date Posted: March 12, 2010 at 11:27 PM
Well, I read where someone had a HU with balanced output but needed some sort of adapter. I just was wondering if the balanced input on my BXI would need an adapter in like manor?
-------------
Still learning
Kraco
|