Just wondering...Does anyone know why on the wiring diagrams for a Dodge Ram 1500, the starter wire has the comment to add a relay for remote start. AudioVox lists such a comment but not on the Bulldog site
Starter |
Yellow or Blue / YELLOW |
Ignition Switch Harness, Must Add Relay for Remote Start |
Is this just refering to the Blue / YELLOW.
Just curious. Thanks.
Rich
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Hey,
Thanks for the reply. Reason I asked is that I installed a Viper 571 in my brothers truck and didn't find the Blue / YELLOW and had no problems using the Yellow for the starter. Just wanting to clear my own mind that I didn't miss something.
Rich
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
One other question about this truck. I did not connect the Ignition 2 wire as this was acting like a second accessory. Voltage dropped to zero when cranking the starter. Anyone know for sure if this is a Ignition 2 or a second accessory. Or does a second Ignition drop voltage on cranking. Everything is working fine with the truck, remote start, and key take-over. So I left it alone.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
BLACK/ white power the integrated electronic module, intermittent wiper switch, wiper motor, wiper motor relay, radio, seatbelt control module, cigar lighter and combination flasher.
-------------
This information is provided only as a reference.
All circuits should be verified with a digital multi-meter prior to making any connections.