Print Page | Close Window

alpine type r subwoofer wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126921
Printed Date: May 02, 2024 at 9:28 AM


Topic: alpine type r subwoofer wiring

Posted By: maximus321
Subject: alpine type r subwoofer wiring
Date Posted: April 11, 2011 at 11:55 AM

Hello! I need someone to tell me if it's ok to run to different VC setups off the same amp. In other words I have two Type R subs,one ten and a twelve and they're in their own enclosures. The twelve has a bad wiring conection to the cone so I am running it as a SVC(originally a DVC), the ten is a DVC also and I have it wired that way. Both of these subs are going to the same Kenwood amp. So basically I'm running a SVC and DVC together to the same amp. Is this ok? The Kenwood is 2ohm stable but not 1. I know this will give me a funny ohm load but will it stay over 2? Im finishing my install now so if anyone can help asap I would really appreciate it. Thanks!!!

1995 Acura Legend

Eclipse head unit

 Hertz interior speakers

 JL e4300 for the Hertz

 Kenwood Kac-9102D

 12in Alpine type R

 10in Alpine type R

 2 farad cap

 Audio Control equalizer



-------------
Knowledge is the key



Replies:

Posted By: maximus321
Date Posted: April 12, 2011 at 12:41 AM
Really?? I posted this yesterday and have had almost 40 people look and read but no solution. No solution?? Please will someone read my post and help me out? Thanks

-------------
Knowledge is the key



Posted By: i am an idiot
Date Posted: April 12, 2011 at 1:12 AM

What is the impedance of the 12?  What is the impedance of the 10?


Print Page | Close Window