stereo problem, 1999 mazda protege

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127146
Printed Date: April 28, 2024 at 12:34 AM

Topic: stereo problem, 1999 mazda protege

Posted By: mikeduff
Subject: stereo problem, 1999 mazda protege
Date Posted: April 27, 2011 at 6:27 PM

Hey guys. Im new I say hi to you at the same time. Im from Quebec, Canada and I used your stereo schematics quite a few times. So, ive got a problem. I got a 1999 mazda protege and while installing my new stereo, the signalisation lights stopped working and my new stereo didn't work. So I put back in my old stereo but it doesnt work anymore, when it used to when I first removed it. I checked the fuse but they don't seem to be blown.

If anyone could help me and if you need some more information, I can help you with that.

Thanks in advance !

-Mikael

Replies:

Posted By: t&t tech
Date Posted: April 27, 2011 at 6:36 PM

Signalisation lights?

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Posted By: mikeduff
Date Posted: April 27, 2011 at 6:42 PM

The lights that show witch way your turnikg ( sorry for my band english i speak french :p )

Posted By: blanx218
Date Posted: April 27, 2011 at 10:02 PM

Did you check all the fuses or just the radio fuse? Its possible that you may have blown another fuse. Check all the fuses both inside the car and out under the hood. I'm 99% sure you have a blown fuse somewhere.

Posted By: buddholly
Date Posted: April 28, 2011 at 10:46 AM

There should be a fused labeled room down in the kick panel, believe it's 10 amp. Check it.

Do your hazards work?

Posted By: mikeduff
Date Posted: April 28, 2011 at 2:36 PM

It's allright guys, I found what the problem was. My stereo wasn't working for two reason. First, I blew a fuse because my 12V wire touched the frame of my radio, doing a short, so it blew the 15 amp fuse. Then, I found out that there was an other ground wire wich wasn't in the 2 wiring harness for my radio so I just plugged that in and the stereo worked just fine.

For the flashers, I disconnected the harness wich was connected to the hazard lights button on the dash, thats why they weren't working at all.

thanks for the advice !