2006 lexus is25, aftermarket amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127522
Printed Date: June 15, 2024 at 6:51 PM
Topic: 2006 lexus is25, aftermarket amp
Posted By: tak4
Subject: 2006 lexus is25, aftermarket amp
Date Posted: June 02, 2011 at 12:36 AM
Ok so Im trying to install a double din into my 2006 lexus is250. The problem is that in order for me to install my aftermarket HU I will need to bypass the stock amp. So I want to run all the speakers through my aftermarket amp and run it through my double din.
The problem is that the is250 has 13speakers. How would I go about wiring it to my 4channel amp?? i have no idea how to do this.
Replies:
Posted By: blanx218
Date Posted: June 02, 2011 at 11:51 PM
take a look at the Metra TYTO-01. Its an amp integration harness to keep the factory amp functional with an aftermarket headunit. If you want to use the 4 channel amp it shouldnt be a problem. I'm not sure of the exact setup off the top of my head but more than likely the car has a variety of different speakers - midrange drivers, tweets, center channel, etc. In most cases, impedance wise, tweeters are irrelevant because of them being designed for high range freq. the only problem you may find is the center channel
Posted By: tak4
Date Posted: June 03, 2011 at 2:52 PM
Oh ok, so you think it would be better and easier to use the Metra harness then a 4channel amp?
I looked up info and it look pretty easy to install.
Posted By: Ravendarat
Date Posted: June 03, 2011 at 4:28 PM
If you are simply using the stock speakers than I would toss the 4 channel away and use the module and call it a day, you'll loose less hair in the long run ;)
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: tak4
Date Posted: June 03, 2011 at 8:22 PM
I do like my hair. haha ok ill order one!
|