Print Page | Close Window

2 amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12781
Printed Date: June 08, 2024 at 9:10 PM


Topic: 2 amp

Posted By: vxliquid
Subject: 2 amp
Date Posted: April 26, 2003 at 5:10 PM

Can someone plz post an image or explain how wire the RCA's in a 2 amp config?




Replies:

Posted By: vxliquid
Date Posted: April 26, 2003 at 5:21 PM

Lets say that I only have one set of RCa's comming out of the radio




Posted By: Big Purds
Date Posted: April 27, 2003 at 1:13 AM
you have to buy a set of splitters that have a single male end and two female ends...then run one set to each amp...



Posted By: SOUND PRESSURE
Date Posted: April 27, 2003 at 1:14 AM
Do you have an input and output on one of the amps for rca's? If so hook up your inputs from your headunit into that and hookup your output rca's from that amp into the input rca on the other amp. That is a daisy chain. If not then hook up a y male to two female connector and split the rca signal that way.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!


Print Page | Close Window