Print Page | Close Window

stereo problems after new one

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=130125
Printed Date: October 31, 2024 at 7:37 PM


Topic: stereo problems after new one

Posted By: drumnguy
Subject: stereo problems after new one
Date Posted: January 09, 2012 at 3:23 PM

Hello, 

             I had a Pioneer am fm cd bluetooth radio installed by guys that I assumed knew how to do it, Into my 2000 chevy Silverado truck.. Now I am having these problems ever since.. 1 My RPM/Speedometr gauges are jumping when you click the ignition on, but go to normal after a few seconds. 2.  My stereo wont keep memory of clock setting, station settings, etc   This is a Pioneer radio taking the place of a factory Delco cd am/fm. Also I am worried that its not wired correctly becasue they had a hard time color coding what wires went from harness to new radio.. Im also worried that it is wired wrong and It will run my battery down after it sits.. Please help me with this.I thank you so much!




Replies:

Posted By: drumnguy
Date Posted: January 09, 2012 at 3:24 PM
"This is a 2000 Chevy Silverado truck extended cab 1500, Thank you!



Posted By: i am an idiot
Date Posted: January 09, 2012 at 6:35 PM
The Radio's Yellow wire shuld be connected to a wire that has constant 12 volts.  I think it is going to be an orange wire.


Print Page | Close Window