Print Page | Close Window

dvc+svc

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135654
Printed Date: May 19, 2024 at 3:27 PM


Topic: dvc+svc

Posted By: 04nata
Subject: dvc+svc
Date Posted: December 29, 2013 at 6:33 PM

If I have 2 subs that are dual 4ohm voice coils and 1 sub that is a single 4ohm voice coil, will it work out if I run the DVC4's in series to get 8 from each and then parallel with the SVC 4 to get a 2 ohm load?

4+4=8 s

4+4=8 s

8+8+4=2 p

will I get even power to each sub?



-------------
2004 Hyundai Sonata
Kenwood KDC-X599 HU
2-Sundown X-18D4
2-SQ Q4500.1
2-SQ Q90.4
1-Massive DBX4
8-Niche 5.25 mids
8-Niche Tweeters
4-Skar 8" mid-bass
OhioGen 220a alt
OhioGen 350a alt
156.0



Replies:

Posted By: i am an idiot
Date Posted: December 29, 2013 at 7:52 PM
The single 4 ohm driver will get 50% of the amplifiers power, and the dual 4s will split the other half of the power between them. So they will each get 25% of the amps power.





Print Page | Close Window