Print Page | Close Window

kicker compr 10 dvc to my amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137068
Printed Date: April 27, 2024 at 12:26 AM

Topic: kicker compr 10 dvc to my amp

Posted By: kasper88
Subject: kicker compr 10 dvc to my amp
Date Posted: August 06, 2014 at 9:48 PM

I just picked up 2 2ohm kicker CompR 10 600rms subs with a selector switch for 1ohm or 4ohm, and a 2ch planet audio ac2000.2 amp rated at RMS Power at 2ohm 700x x2 or bridged at 4ohms for 1400w x1 rms. How would this be wired, Sub 1 neg to sub 2 neg to amp Sub 1 pos to sub 2 pos to amp? Will both run on just one channel giving me the right wattage? or will i lose wattage? never had subs and im lost in the twilight zone on this one. Thanks in advance to anyone who can give me a idea on where to start.

Replies:

Posted By: kasper88
Date Posted: August 06, 2014 at 10:00 PM

also what should the selector switch be sett too? Thanks again.

Posted By: kasper88
Date Posted: August 07, 2014 at 9:11 AM

I also have a planet Audio AC3000.1D mono block

Print Page | Close Window