parts for orion hcca amps
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137306
Printed Date: April 27, 2024 at 3:50 PM
Topic: parts for orion hcca amps
Posted By: supradude
Subject: parts for orion hcca amps
Date Posted: September 22, 2014 at 1:13 PM
Does anybody know where I can order parts for these amps?
-------------
'85 Toy
Replies:
Posted By: haemphyst
Date Posted: September 22, 2014 at 7:04 PM
Ummm... Orion? Now owned by Directed, if I remember correctly.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: supradude
Date Posted: September 22, 2014 at 7:11 PM
It's the old Orion hcca, the red one. They don't have a phone number contact on the website.
-------------
'85 Toy
Posted By: i am an idiot
Date Posted: September 22, 2014 at 9:09 PM
What parts do you need?
Posted By: supradude
Date Posted: September 22, 2014 at 9:30 PM
I've got a friend that'll repair it if I can get the parts. I'm not sure which parts he'll need until he tests it out. I want to see if I can get parts if he needs them before he goes through the trouble of looking into it.
-------------
'85 Toy
Posted By: i am an idiot
Date Posted: September 22, 2014 at 9:54 PM
Semiconductors and integrated circuits are easily obtainable. Transformers will have to be made. Potentiometers are accessible as well. There are not any proprietary parts in them.
Posted By: supradude
Date Posted: September 22, 2014 at 9:57 PM
Ok. Thanks. I didn't know that.
-------------
'85 Toy
Posted By: i am an idiot
Date Posted: September 22, 2014 at 10:17 PM
What is the problem with the amplifier? Which amplifier? Is the heat sink dull red or glossy red?
Posted By: supradude
Date Posted: September 22, 2014 at 10:36 PM
It's the old Orion 250 HCCA. The dull red paint. It looks like some of the parts inside are burned.
-------------
'85 Toy
Posted By: i am an idiot
Date Posted: September 23, 2014 at 8:38 AM
Are they the Transistors mounted to the heat sink? If so tell your guy not to use a screwdriver to pry the transistors from the aluminum bar. They will break. He needs to get a set of flush cut wire cutters and open them and grab the corners of the transistor and rock it to separate from the adhesive on that bar. If it is first generation the power supply parts are going to be 2N6488s If a later version they are mosfets that if I remember correctly are 50N06's. Let me know the numbers and I will let you know a suitable replacement.
Posted By: supradude
Date Posted: September 23, 2014 at 10:51 AM
I'll let you know. Thanks for helping me with this. I'm not sure when he's gonna get to it but ill try to get back in touch soon as he lets me know
-------------
'85 Toy
Posted By: supradude
Date Posted: September 27, 2014 at 11:57 AM
Check your PM, "i am an idiot." I sent you some info on the parts for the amp.
-------------
'85 Toy
|