gmos-lan-02, silverado, reverse sensors

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137616
Printed Date: April 28, 2024 at 6:11 AM

Topic: gmos-lan-02, silverado, reverse sensors

Posted By: redlinecustoms
Subject: gmos-lan-02, silverado, reverse sensors
Date Posted: November 07, 2014 at 9:24 AM

I installed the above harness with an in dash nav unit, functions ok. My question or issue is, the factory reverse sensors USED to be progressive, the warning beep would speed up the closer I got to something while backing up and then become a steady tone when I was about a foot away.

NOW with the gmos-lan-02 it's just a steady beeping, it does not speed up or slow down when I get closer to something. Anyway to adjust the lan-02 to do the same as factory or is there another integration unit that will perform like the factory did?

Thanks

Replies:

Posted By: co_ne_dub
Date Posted: November 07, 2014 at 10:48 AM

Depending on the radio you could try the iDatalink Maestro.
Need an iDatalink compatible radio though. Some Kenwood , Alpine, and Pioneer.

Posted By: racerjames76
Date Posted: November 12, 2014 at 11:20 AM

My take on issues like this lately is that the manufacturers of the interfaces need to be made aware of such problems. Even if you are just the consumer on the end you have a right to let the company know their software/hardware changed something and you would like an explanation as to how that can be remedied, or why it can not. No need to be angry, understand they are limited on what they can and can not do, but expecting an answer is not outrageous. Just my $0.02 posted_image

-------------
To master and control electricity is perfection. *evil laugh*