installing a backup camera to a radio
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=137643
Printed Date: April 28, 2024 at 7:08 PM
Topic: installing a backup camera to a radio
Posted By: aquadr
Subject: installing a backup camera to a radio
Date Posted: November 10, 2014 at 9:06 AM
I installed a backup camera, which is controlled by the reverse light wire. Reverse -->Camera on, Not Reverse--> Camera off
I would like to extend the time that camera stays on (10-30 Sec) after I take it out of reverse gear, by possibly using a diode and a capicitor, can this be done? If so, how?
12V --> additional 10- 30 sec
Replies:
Posted By: aquadr
Date Posted: November 10, 2014 at 9:13 AM
Acura Integra 94
Posted By: DYohn
Date Posted: November 11, 2014 at 9:31 AM
The easiest way to do it is to install a 12VDC power-off time delay relay. They are available from any electronics supply house like Mouser or Newark or Grangier and many are adjustable for how long they maintain power before switching off. ------------- Support the12volt.com
Posted By: aquadr
Date Posted: November 12, 2014 at 10:04 AM
DYohn, thanks for the response, but I prefer to build the circuit, do you have some information regarding how to do it with a capictor and diode arrangement?
|