2005 gmc yukon denali r.a.p wire?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138318
Printed Date: May 03, 2024 at 8:13 AM
Topic: 2005 gmc yukon denali r.a.p wire?
Posted By: dcman41
Subject: 2005 gmc yukon denali r.a.p wire?
Date Posted: January 22, 2015 at 1:32 AM
Just added a pac aai-GM12 Aux interface. This car didnt have the remote turn on wire in B3, so i was forced to use a 12V switched wire. The problem with this is when you take the key out of the ignition the radio stays on, but the pac shuts off and creates static. This is a very big annoyance. Does anyone know where i can grab a RAP wire from so i can power this PAC GM12 interface?
Replies:
Posted By: dcman41
Date Posted: January 22, 2015 at 3:23 PM
after doing some research, and going through diagrams. I found a "Rap Supply Voltage wire" which is a Dark Blue wire at the BCM @ position B3 in Connector 2, a 24 pin gray plug. This will only be used as a remote turn on lead for the pac aai-Gm12 interface. I am debating on whether or not to wire up a relay to trigger this RAP wire. I feel like the relay will draw more current than the actual remote turn on of this interface. What do you guys think ?
Posted By: i am an idiot
Date Posted: January 23, 2015 at 1:43 PM
The relay will draw more than the pac device.
|