Print Page | Close Window

Distribution block

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=138767
Printed Date: May 03, 2024 at 9:40 PM


Topic: Distribution block

Posted By: gil729
Subject: Distribution block
Date Posted: April 03, 2015 at 11:26 PM

I want to install another amp and need a distribution power block 4 awg input and 4 awg out and 8awg out my question is do I have to change the 4 awg power wire coming from the battery to a thicker 0awg wire input to the block or can I still use the 4awg wire that I have coming from the battery the other amp I want to install is for my 6x9 speakers its a 100 rms @4ohms soundstream

-------------
💀skulls💀



Replies:

Posted By: DYohn
Date Posted: April 05, 2015 at 9:22 AM
First of all you don't need 4 gauge or even 8 gauge for a 100 watt amplifier. 10 will do in most cases. So go for it.

-------------
Support the12volt.com



Posted By: gil729
Date Posted: April 05, 2015 at 1:32 PM
Thanx


-------------
💀skulls💀


Print Page | Close Window