Print Page | Close Window

series and parallel calculator

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=139163
Printed Date: April 30, 2024 at 5:17 AM


Topic: series and parallel calculator

Posted By: gmansontos
Subject: series and parallel calculator
Date Posted: July 05, 2015 at 4:35 PM

how do I input 2 or 4 ohm dual voice oils into the calculator? When I put D4 it don't work.

-------------
Gman



Replies:

Posted By: i am an idiot
Date Posted: July 05, 2015 at 5:41 PM
How many D2s? How many D4s? What is the RMS power handling of each? What kind of amplifier? 1 channel, 2 channel or 4 channel?



Posted By: the12volt
Date Posted: July 05, 2015 at 7:05 PM
Enter the value of each voice coil into each calculator input. If you have a speaker with a dual 2 ohm voice coil, you would enter 2 into two of the calculator inputs, not D2 into a single input.

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window