Print Page | Close Window

Bypass 2006 jeep commander factory amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141714
Printed Date: May 06, 2024 at 5:24 AM


Topic: Bypass 2006 jeep commander factory amp

Posted By: podmen311
Subject: Bypass 2006 jeep commander factory amp
Date Posted: September 12, 2016 at 9:30 PM

Getting alternator whine and can't get rid of it, I've tried everything g! Help!

-------------
Podmen311MN



Replies:

Posted By: lurch228
Date Posted: September 13, 2016 at 1:40 PM
What have you done?

Upgrades, add-ons?

Methods to eliminate alternator whine you have tried in detail?




Posted By: podmen311
Date Posted: September 13, 2016 at 7:35 PM
I've got everything hooked up properly, grounds are perfect. I've got an interface installed. It's not coming from the rca's amp o4 sub. Even with the stock BA amp unhooked there is still a faint whine. Most of the whine comes from the front driver side dash speaker

-------------
Podmen311MN




Posted By: podmen311
Date Posted: September 13, 2016 at 7:41 PM
Do it need to bypass factory amp?

-------------
Podmen311MN




Posted By: i am an idiot
Date Posted: September 13, 2016 at 7:56 PM
Did you add an aftermarket amplifier? If so, turn the gain controls on that amp all the way down. Do you still hear the noise?

We have no idea if you need to bypass the factory amplifier. We do not even have a clue as to what the system consists of.




Posted By: lurch228
Date Posted: September 14, 2016 at 12:00 AM
i am an idiot wrote:

Did you add an aftermarket amplifier? If so, turn the gain controls on that amp all the way down. Do you still hear the noise?

We have no idea if you need to bypass the factory amplifier. We do not even have a clue as to what the system consists of.


Exactly why I asked what was installed and how?




Posted By: podmen311
Date Posted: September 14, 2016 at 8:25 AM
Pretty simple here people, factory amp and aftermarket HU. I'm getting whine. How to I remove it? Pretty straight forward.

-------------
Podmen311MN




Posted By: lurch228
Date Posted: September 14, 2016 at 3:35 PM
First thing I would try is to ground the chassis of the Aftermarket HU to the vehicle.





Print Page | Close Window