Print Page | Close Window

Backup camera wiring?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141810
Printed Date: April 29, 2024 at 8:53 AM


Topic: Backup camera wiring?

Posted By: luniz7
Subject: Backup camera wiring?
Date Posted: October 02, 2016 at 6:40 PM

Back up camera wiring?

I have a 12 Camry Hybrid LE. I installed the otocam3. I've searched all the threads on backup camera wiring and can not find my answer. How do I properly wire this backup camera? The otocam3 has a Reverse trigger wire on the HU, what connects to it? I've attached a picture of the camera side and my drawing of all the wiring on it. If someone could let me know how to wire this properly I would appreciate it.


I'm guessing the red wire on the camera side goes to the 12v+ reverse wire and the red wire on the rca side goes to the HU reverse trigger while the black wire on the camera side goes to ground. Is this correct?


Attachments
CameraCamera 2



Replies:

Posted By: i am an idiot
Date Posted: October 02, 2016 at 9:01 PM
Your guessing is accurate.




Posted By: luniz7
Date Posted: October 02, 2016 at 9:48 PM
i am an idiot wrote:

Your guessing is accurate.

Great, thanks!




Posted By: luniz7
Date Posted: October 02, 2016 at 9:57 PM
i am an idiot wrote:

Your guessing is accurate.
.

One other question, should I add a fuse inline between the reverse wire tap and the camera?




Posted By: i am an idiot
Date Posted: October 02, 2016 at 10:31 PM
Are the red wires of your camera substantially smaller than the wire you tapped into? What size is the fuse for the reverse lamps in the vehicle?




Posted By: luniz7
Date Posted: October 03, 2016 at 7:56 AM
i am an idiot wrote:

Are the red wires of your camera substantially smaller than the wire you tapped into? What size is the fuse for the reverse lamps in the vehicle?



Yes they are. About half the size. I haven't tapped into them yet. I haven't looked at the fuse size yet either.





Print Page | Close Window