Print Page | Close Window

2005 equinox aftermarket radio install

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142352
Printed Date: May 03, 2024 at 1:32 AM


Topic: 2005 equinox aftermarket radio install

Posted By: sammmiller
Subject: 2005 equinox aftermarket radio install
Date Posted: January 02, 2017 at 10:59 AM

Trying to install a Kenwood in equinox with factory equipment. Installed axxess gm data interface to retain chime. Everything works except no sound out of speakers. Speakers work with factory system.

-------------
Sam



Replies:

Posted By: i am an idiot
Date Posted: January 02, 2017 at 2:15 PM
Is there a blue or a blue white wire on the Axxess harness?



Posted By: sammmiller
Date Posted: January 02, 2017 at 2:21 PM
Yes.blue with white stripe.


-------------
Sam



Posted By: i am an idiot
Date Posted: January 02, 2017 at 2:28 PM
What did you connect to that wire?



Posted By: sammmiller
Date Posted: January 02, 2017 at 2:34 PM
Nothing. Kenwood has that wire labeled P.CONT ANT.CONT.I read that as meaning power antenna.Can dose not have power antenna.

-------------
Sam



Posted By: i am an idiot
Date Posted: January 02, 2017 at 2:52 PM
The blue white of the axxess piece is the amplifier turn on wire. Connect it to the p. cont wire.



Posted By: sammmiller
Date Posted: January 02, 2017 at 2:56 PM
I will.Do you know what the corresponding wire color in the chevy harnesses should be ? I want to make sure wire in axxess harness is in the proper pin hole.

-------------
Sam



Posted By: i am an idiot
Date Posted: January 02, 2017 at 3:37 PM
Pink



Posted By: sammmiller
Date Posted: January 02, 2017 at 4:09 PM
Yes it works. Thank you so much for volunteering your time and knowledge.

Sam

-------------
Sam


Print Page | Close Window