How to wire two 2 ohm DVC subs to 2 ohm?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142972
Printed Date: May 02, 2024 at 9:04 AM

Topic: How to wire two 2 ohm DVC subs to 2 ohm?

Posted By: squarebodmafia
Subject: How to wire two 2 ohm DVC subs to 2 ohm?
Date Posted: May 17, 2017 at 9:32 PM

Ok so I picked up (2) RockfordFosgate r2sd2-10 in a sealed box. The box has the subs separated by a wall. How do I wire these to 2 ohm with two terminals? Also would it be a good idea to buy a matching set and and do 4 at 2 ohms?

-------------
Bowtie Til' I Die

Replies:

Posted By: squarebodmafia
Date Posted: May 17, 2017 at 9:49 PM

I have been looking through diagrams for hours and can't seem to find what I am looking for.

-------------
Bowtie Til' I Die

Posted By: i am an idiot
Date Posted: May 18, 2017 at 10:04 AM

Middle Diagram is the one you need to use

Posted By: squarebodmafia
Date Posted: May 18, 2017 at 10:14 AM

They're in separate boxes though how do I connect them to each other

-------------
Bowtie Til' I Die

Posted By: squarebodmafia
Date Posted: May 18, 2017 at 10:23 AM

https://www.amazon.com/gp/aw/d/B00FMNL4LE/ref=gp_aw_ybh_a_2?ie=UTF8&psc=1&refRID=9VNDRPKXYS5FKDMMAVNN

My box and as you can see they have the subs in different cabinets.

-------------
Bowtie Til' I Die

Posted By: i am an idiot
Date Posted: May 18, 2017 at 11:20 AM

Bottom Diagram

Do this to both then connect both to amplifier.

Posted By: squarebodmafia
Date Posted: May 18, 2017 at 11:32 AM

Thank you very much.

-------------
Bowtie Til' I Die

Print Page | Close Window