OEM Navigation install 06 Mazda 3
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=142985
Printed Date: May 03, 2024 at 11:27 AM
Topic: OEM Navigation install 06 Mazda 3
Posted By: rad06
Subject: OEM Navigation install 06 Mazda 3
Date Posted: May 21, 2017 at 9:46 AM
I have a 2006 Mazda 3. It has stereo only BUT navigation was an option. I just bought the navigation and radio from a parting out 06. Will the optional wiring for the navigation already be in my dash since it was an option? Or do I need to run additional wires?
-------------
Mazda 3 Sedan
Replies:
Posted By: i am an idiot
Date Posted: May 22, 2017 at 8:31 AM
I seriously doubt the wiring will be there. You will have to get at least the gps antenna. You will have to get the harness or harnesses that incorporate the speed sense and the reverse wires, and connect to those wires.
Posted By: rad06
Date Posted: May 22, 2017 at 2:18 PM
Yes, I have done more research. If car was not previously set up for this then additional wiring is necessary and an antennae must be added and also
it is not a touch screen so a new control must be installed into center column. So I will just sell the navigation unit and radio unit to someone else, and use my Garmin or cell phone.
-------------
Mazda 3 Sedan
|