slot port enclosure

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143379
Printed Date: April 28, 2024 at 9:50 PM

Topic: slot port enclosure

Posted By: sethwilliams88
Subject: slot port enclosure
Date Posted: July 19, 2017 at 9:35 AM

Any 1 have box plans for a box 2cu @ 32hz

-------------
Seth

Replies:

Posted By: sethwilliams88
Date Posted: July 25, 2017 at 11:20 PM

I cannot for the life of me figure out the sub box calculators. So if I want a box 2.2 cubic feet tuned to 32 Hertz how do I figure out my cut sheet. For a slot Port box can some 1 plz help

-------------
Seth

Posted By: DYohn
Date Posted: July 29, 2017 at 2:12 PM

The calculators on this site do not generate cut sheets. To calculate the slot length required in a 2.2 CUFT enclosure for 32 Hz resonance using the slot port calculator you need to know the slot opening size you wish to use. What are the dimensions of your 2.2 CUFT enclosure?

-------------
Support the12volt.com

Posted By: sethwilliams88
Date Posted: July 30, 2017 at 12:07 AM

The dimensions are 16 inches deep 24 in Long 14 inches high. It says that my port should be 31.143801 long but I don't understand how long that is and how to break it down inside the Box

-------------
Seth

Posted By: DYohn
Date Posted: August 01, 2017 at 2:13 PM

sethwilliams88 wrote:

The dimensions are 16 inches deep 24 in Long 14 inches high. It says that my port should be 31.143801 long but I don't understand how long that is and how to break it down inside the Box

What did you use as the port opening size?

-------------
Support the12volt.com

Posted By: sethwilliams88
Date Posted: August 01, 2017 at 5:53 PM

2.5 inches

-------------
Seth

Print Page | Close Window