2016 Jeep Wrangler Unlimited Subwoofer Signal

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143384
Printed Date: April 30, 2024 at 6:19 PM

Topic: 2016 Jeep Wrangler Unlimited Subwoofer Signal

Posted By: johnppet
Subject: 2016 Jeep Wrangler Unlimited Subwoofer Signal
Date Posted: July 21, 2017 at 2:45 PM

Wiring diagram for the 9 speaker system with sub woofer. Trying to add another sub with an amp and I'm not sure where I can tie into to get the signal?

-------------
johnp

Replies:

Posted By: i am an idiot
Date Posted: July 21, 2017 at 7:35 PM

Voice coil 1 positive is gry/brn negative is dk grn/brn
Voice coil 2 positive is gry/wht Negative is dk grn/wht

amplifier under driver dash, black 16 pin plug, pins 14 - 6; 3 - 11

Posted By: johnppet
Date Posted: July 21, 2017 at 8:10 PM

Thanks for the input! I guess I phrased it wrong I am just wanting to pick up the head unit signal before it's amplified, thanks in advance.

-------------
johnp

Posted By: i am an idiot
Date Posted: July 23, 2017 at 4:36 PM

Chances are there is not enough signal between head unit and amplifier. And if you catch it there your sub will only play with front or rear signal. If you want it to play with both front and rear you will need to catch sub out of the amplifier and use a line output converter.

Posted By: i am an idiot
Date Posted: July 23, 2017 at 4:45 PM

If you insist on not using a line out converter

Print Page | Close Window