Sub/Amp on Bose in Mazda 6
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21777
Printed Date: May 10, 2024 at 3:16 AM
Topic: Sub/Amp on Bose in Mazda 6
Posted By: freakystyley990
Subject: Sub/Amp on Bose in Mazda 6
Date Posted: November 22, 2003 at 2:20 AM
I have a 2003 Mazda 6 with a bose system. The bose system has a factory sub in the trunk with four wires going into it. I have an amp/sub combo that I want to install. I bought a special line output converter piece from soundgate (model LOCB.2) to do it. Out of the four wires that go into the factory sub, one shows 12v, one shows ground, and there is two more. Are these the preamp wires? I am just looking for some suggestions for anyone with experience in adding amps onto bose systems.
Replies:
Posted By: freakystyley990
Date Posted: November 24, 2003 at 11:27 AM
Can anyone help me out?
Posted By: si90lude
Date Posted: November 24, 2003 at 12:12 PM
your on the right track, the wires going into the sub that don't have voltage are the signal leads, you should be able to use these for your signal wires. Depending on your amp\sub, i suggest disconnecting the factory sub (disconnect power to the amp or you can get a wierd feedback.
|