Passive Crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22858
Printed Date: June 03, 2024 at 6:36 AM

Topic: Passive Crossover

Posted By: gregfocker77521
Subject: Passive Crossover
Date Posted: December 14, 2003 at 10:06 PM

I have a 3 way crossover question. It has one input and three outputs(woofer, tweeter-hi, and tweeter-low).

If i hook three 4 ohm speakers would this lower the ohms to below a 2 ohm load or will it maintain 4 ohm load? my amp is only good to 2ohm and i dont want to go lower.

Replies:

Posted By: forbidden
Date Posted: December 15, 2003 at 1:43 PM

Chances are that if it is a "factory crossover" that came with brand x speakers (it sounds like it is), then it will probably hold to a 4 ohm value.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window