KEH-1060 wiring code

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23813
Printed Date: May 28, 2024 at 5:50 PM

Topic: KEH-1060 wiring code

Posted By: mike27
Subject: KEH-1060 wiring code
Date Posted: January 02, 2004 at 11:33 PM

I have a pioneer Keh 1060 cassette player and never hooked it up for 4 speaker system does anyone out there that may helped me checked the pioneer site this one wasn`t listed it has only 6 wires for the speaker output.

Replies:

Posted By: danxav13
Date Posted: January 16, 2004 at 11:43 PM

Unfortunately it's a common ground system. The two left speakers use one negative speaker wire and the rights have their own. If you can, I suggest springing for another radio. But , if that's all you can do, it'll be fine

Posted By: forbidden
Date Posted: January 17, 2004 at 12:07 AM

Post up the color codes of your wiring, I'll decipher it for you, or do a search on this site, I've posted for this desription before. It is not a common ground system, in the true sense, what you have is 4 positive speaker leads, one for each corner and two shared negative leads, one for each side. If you have 3 green wires and 3 grey wires (primary colors) these are left and right, the ones with black stripes are the shared negatives, thus split that wire to the negatives on each speaker, the solid color wire is the front + and the solid / red stripe is the rear + .(If memory is correct)

-------------
Top Secret, I can tell you but then my wife will kill me.