Print Page | Close Window

Pioneer Forums

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=31721
Printed Date: May 14, 2024 at 2:36 PM


Topic: Pioneer Forums

Posted By: 01 Suburban LS
Subject: Pioneer Forums
Date Posted: May 06, 2004 at 4:15 PM

Anyone know of any on-line forums that cater to those of us with Pioneer electronics? I have a couple questions about my headunit.



Replies:

Posted By: robbie2883
Date Posted: May 06, 2004 at 4:57 PM
what are your questions? I know quite a bit about pioneer.

-------------
if its jammed force it - if it breaks in the process it needed to be fixed anyway
posted_image




Posted By: forbidden
Date Posted: May 06, 2004 at 6:30 PM
Exactly, post the question, there are some very informative people on this site.

-------------
Top Secret, I can tell you but then my wife will kill me.




Posted By: 12V_REP
Date Posted: May 06, 2004 at 7:03 PM
I rep Pioneer, so I might be able to help you as well.




Posted By: forbidden
Date Posted: May 06, 2004 at 7:26 PM

Thought I smelled something familiar lurking in the depths of all the posts, nice to have you here.



-------------
Top Secret, I can tell you but then my wife will kill me.




Posted By: 12V_REP
Date Posted: May 06, 2004 at 7:30 PM
Thank you....I think?????




Posted By: 01 Suburban LS
Date Posted: May 07, 2004 at 12:04 PM

My question is that I want to know if it is possible to keep the display on my  DEH-P6500 from reversing itself. It starts out with a black backgroind and white lettering and graphics, then reverses after 15 or so seconds. I could swear I saw the same unit at the store and it never changed the entire time I stood there and watched it. I cant find anything in the manual that expains how to do this, but then agian I found the manual not to be too informative.

Thanks for any help.

-Mike





Posted By: Ravendarat
Date Posted: May 07, 2004 at 12:11 PM
turn the deck off by holding the source button, then hold down the function button. That will take you to a menu with a demo option. Turn the demo option off and the deck will no longer flip flop on you. I think thats how you do it at least but its been a little while since I have done it.

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer




Posted By: 01 Suburban LS
Date Posted: May 07, 2004 at 3:52 PM

OK, I figured it out. You were almost right Ravendarat. posted_image I had to turn the unit off by pressing the source button. Then hitting the number 5 station preset button turns reverse mode off then on. Hitting 6 turns demo mode on and off. Pressing the function button allows you to set the time, aux input, motion mode and a few other things I forgot.

Agian, thanks for everyones help.

-Mike





Posted By: 93s10er
Date Posted: May 12, 2004 at 12:19 AM
I have another question about the Pioneer DEPH4000.  Should I hook my amp up to the blue wire or the blue/white wire.  Also what is the gold wire for coming from the back of the pioneer harness.




Posted By: onthespot
Date Posted: May 12, 2004 at 12:13 PM
you will hook up the amp turn on wire to the blue/white wire. The yellow/black wire is for cell phone mute

-------------





Print Page | Close Window