anyone have this speakers?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=32130
Printed Date: June 04, 2024 at 8:08 AM

Topic: anyone have this speakers?

Posted By: chexmixelite
Subject: anyone have this speakers?
Date Posted: May 13, 2004 at 11:28 PM

well anyone have mtx 10" 200rms?? i brought 4 of these for 120... it was on sale... actually buy one get one free... since these are 200 rms and i have rockford fosgate 800a2. is this how i connect it to get the best of both the amp and the sub

(-) amp to (-) sub (+) to (-) 2nd sub (+) to (+) amp

i might buy 2 boxes for my subs from circuit city... but i jus wondering what size should the box be to get my sub to pound like heck... if that is possible

thanks in advance

Replies:

Posted By: neo
Date Posted: May 14, 2004 at 3:46 PM

listen man id go out and buy 2-3 or 4 rockfords,audiobahns or kickers and put that mtx crap away

Posted By: forbidden
Date Posted: May 14, 2004 at 4:39 PM

Post the model# of the mtx subs please.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: neo
Date Posted: May 14, 2004 at 4:44 PM

A good sealed box using the factory recommended air space would get those speakers moving. Its also possible to use a little smaller enclosure and add poly-fil. But steer clear from bandpass!

Neo,Soliving All The Worlds Problems

Posted By: southside
Date Posted: May 14, 2004 at 4:44 PM

neo just a word of advise to u an all. please don't bash anyone's system we are on here to help people not put down their sh*t. so please refrain from do this anymore.

-------------
southsider

Posted By: devilsquid
Date Posted: May 14, 2004 at 4:45 PM

y buy more stuff if you already have what you need. pre fab boxes are alright, but if you want to get the mosf out of what you have, then have a custom box made, or make one your self...

just my two bits!

-------------

Posted By: neo
Date Posted: May 14, 2004 at 4:48 PM

I was just messing with the guy, and besides I posted exactly what he needed soon after. So sorry for the mix up!

Posted By: southside
Date Posted: May 14, 2004 at 4:52 PM

no harm no foul. just we've had some people on here get kind of senitive an stared throwing around a lot of swear words. an mess it for ever one so i say that so people don't get kicked out of this forum. words of advise. posted_image

-------------
southsider

Posted By: customsuburb
Date Posted: May 14, 2004 at 6:06 PM

I'm doing alot of assuming here but if your subs have single 4 ohm coils and you have a 2 channel amp then I would bridge it and wire the subs like this:

posted_image