2001 dodge ram 1500 w/ infinity

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=33347
Printed Date: May 29, 2024 at 4:48 AM

Topic: 2001 dodge ram 1500 w/ infinity

Posted By: yorkie41979
Subject: 2001 dodge ram 1500 w/ infinity
Date Posted: June 05, 2004 at 8:52 AM

hi, installing a cd player in a 2001 dodge ram 1500 w/infinity sound from the factory. does this setup already use an amplifier? the wiring harness i bought for it has a amp wire on it, but i didn't connect it to the oen on the back of the cd player - and when i turn it on, i get no sound. does this wire just need to be connected?

Replies:

Posted By: forbidden
Date Posted: June 05, 2004 at 1:06 PM

Yes it does, connect it to the remote on lead of the new cd player.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: yorkie41979
Date Posted: June 05, 2004 at 8:42 PM

still getting no sound. installing a sony xplode cd player. i tried using the remote turn on wire and didn't work, so then tried using the power antenna wire, didn't work either. any ideas? the radio does turn on, but no sound.

Posted By: Manoftools
Date Posted: June 05, 2004 at 8:51 PM

If one of your speakers is blown or a speaker wire is grounding out for some reason then your radio will not play sound. It is possible that one of your speakers is on its way out, so try hooking up all your speakers individually and see if you get any sound.

Posted By: 00neon
Date Posted: June 05, 2004 at 9:09 PM

i may be stupid for saying this, but make sure that the fuse for the radio isnt blown, if you installed it first with out the remote turn on wire connected, it could have grounded and blown the fuse for the radio................. posted_image

-------------
1 JL 12 w3 D4
1 MTX 421 D Monoblock
1 Sony Xplod 75x4
Front: Alpine SPX-177A
Rear: JL audio VR690-CXI

Print Page | Close Window