300/4 servicing
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=41984
Printed Date: June 12, 2024 at 11:27 PM
Topic: 300/4 servicing
Posted By: perrogrande007
Subject: 300/4 servicing
Date Posted: October 31, 2004 at 3:06 PM
Some of the hex head teminal posts on my JL 300/4 are stripped. Is this something I can get the parts for and fix myself or am I going to have to pony up and pay someone to do it. It isn't under warranty any longer, so that's not an issue.
Replies:
Posted By: jeffchilcott
Date Posted: October 31, 2004 at 3:34 PM
check your local hard ware store, you might not find hex head screws but you can find a replacement, if the actual hex is striped you might have trouble getting them out but try something like pliers to get to them. get creative
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Posted By: Alpine Guy
Date Posted: October 31, 2004 at 3:37 PM
if its the posts,, you can tap new threads into the blocks if theres room....or if its the actual allen key portion that is stripped on the screw, ,you can take a small dremil disc, cut the screw down the center enough that you can unscrew it with a flat head.
-------------
2003 Chevy Avalanche,Eclipse CD7000,Morel Elate 5,Adire Extremis,Alpine PDX-4.150, 15" TC-3000, 2 Alpine PDX-1.1000, 470Amp HO Alt.
Posted By: perrogrande007
Date Posted: November 01, 2004 at 12:56 PM
Thanks guys, any reason to break out the Dremil is fine with me :)
|