Print Page | Close Window

Eclipse 8454 HU

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48056
Printed Date: June 01, 2024 at 11:19 AM


Topic: Eclipse 8454 HU

Posted By: peterhead
Subject: Eclipse 8454 HU
Date Posted: January 18, 2005 at 10:09 PM

I have this deck and plan on setting it up in pro mode as soon as i get some time. I was wondering if it would be better to use the deck's crossover and just set the amps to full range. Also if someone could help me get an idea of what i should set the crossover frequencies to and at what slope.

2 Memphis M3 12s

Memphis MOJO

Memphis 3004

Eclipse 6.5 components

Kicker 6.5 midbass

Thanks in advance




Replies:

Posted By: kfr01
Date Posted: January 18, 2005 at 11:00 PM
Where are the midbass drivers installed?

-------------
New Project: 2003 Pathfinder



Posted By: peterhead
Date Posted: January 19, 2005 at 9:49 AM
Midbasses are in front doors and the components which i meant to put down as 5.25 are in the kickpanels



Posted By: kfr01
Date Posted: January 19, 2005 at 10:56 PM
Awesome. Your system will rock. You can use the xos on the head unit and turn them off on the amplifiers - I do.

The nice thing about the Eclipse head unit is that it is so easy to play around with the crossovers to find what sounds best.

I'd try:

sub-> 80hz
Midbass 80-350hz
Components 350hz+

24db slope. In my opinion, the steeper the better for car audio.

Really, your system should be awesome. This is exactly what I'd do if I could get wife approval for kick panels.


-------------
New Project: 2003 Pathfinder


Print Page | Close Window