Trying to build a box for 2 10s

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=48153
Printed Date: May 21, 2024 at 3:33 AM

Topic: Trying to build a box for 2 10s

Posted By: srusin1
Subject: Trying to build a box for 2 10s
Date Posted: January 19, 2005 at 10:31 PM

I have two 10" MTX t4510-04 subs rated at 225 RMS being powered off a MTX 421d rated at 420 RMS. I have never built a box before but have all the tools neccessary and some experience in building stuff. I know you have to use MDF. Can someone please tell me the best dimensions for my setup, an autocad drawing would be nice if not h*l*w is fine. If it is too complicated im thinking of going to bestbuy and buying a universal box, are those ok for these speakers?

Replies:

Posted By: stevdart
Date Posted: January 19, 2005 at 11:41 PM

MTX has a very detailed box layout and instructions in the tech manual. Is there something about these configurations that won't work in your application?

Print Page | Close Window