amp/speaker inquiry. (alpine/focal)
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=49675
Printed Date: May 21, 2024 at 8:48 PM
Topic: amp/speaker inquiry. (alpine/focal)
Posted By: JASON_ALT13
Subject: amp/speaker inquiry. (alpine/focal)
Date Posted: February 08, 2005 at 8:54 PM
Hi guys,
I have a pair of focal polyglass 165v components and an alpine mrv f340 4 channel amp. My plan is to bridge the amp to power the components.
I will be using a pair of focal 5WS's in the rear. My question is, should I go ahead and purchase the alpine mrd m300 mono amp off my friend to power the small subs? Or should I use my mrv f340 instead, and find a different amp to power the components?
So...to summarize,
focal polyglass 165v up front.
focal 5WS's in the rear.
Alpine mrv f340 4 ch amp.
What amp should I get to complete the system and where should I use it? Thank you.
Jason
Replies:
Posted By: cruelneo
Date Posted: February 09, 2005 at 11:05 AM
i installed those speakers 165v in a '05 chev. 2500hd they sounded great with a mrv f340 so i would use that amp on the highs i also had 2 10' kicker on m-500 so im not sure bout the 300 but i think if the price is right you should
|