Phoenix Gold ZX475TI amp issue

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50926
Printed Date: June 09, 2024 at 7:35 PM

Topic: Phoenix Gold ZX475TI amp issue

Posted By: Steven Kephart
Subject: Phoenix Gold ZX475TI amp issue
Date Posted: February 26, 2005 at 6:22 PM

Hey guys. I am doing an install in a vehicle, and am having problems with one of the TI amps. For some reason the top 3 blue LED's don't light up when the system is turned on. I tested for voltage on both the power and remote leads and have plenty of voltage. The ground is VERY solid and connected to a strut tower bolt that I sanded down to bare metal. I did notice that there are three red LED's on under the plexi window, just like the sub amp (which is working just fine). I know that the speaker wires aren't shorted or anything to cause it to go into protect. Does anyone have any other ideas? It looks to be a used amp.

Steven Kephart

Adire Audio

-------------

Replies:

Posted By: blg748
Date Posted: February 27, 2005 at 8:39 AM

best place to post is on soundoff.phoenixgold.com under PG PRODUCT SUPPORT you always can get help for PG products on thaat site. It's great just go their ppl can and will help you.

Posted By: Francious70
Date Posted: February 27, 2005 at 4:11 PM

I'll second that. I always refer people with PG specific issues to https://soundoff.phoenixgold.com

I'll say hi to you when you get there.

Paul

Posted By: Steven Kephart
Date Posted: February 28, 2005 at 12:26 PM

Wow guys, Thanks a lot. I'll go post on there.

Steven Kephart

Adire Audio

-------------