Print Page | Close Window

Diameter of magnet on new JL 10W3v2

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=53676
Printed Date: June 15, 2024 at 9:20 AM


Topic: Diameter of magnet on new JL 10W3v2

Posted By: 03sdccfx4
Subject: Diameter of magnet on new JL 10W3v2
Date Posted: April 10, 2005 at 10:51 PM

I need to know the diameter of the magnet on the new JL 10W3v2, I am designing my box before I purchase them.

Thanks



-------------
'03 F-250 CC Fx4



Replies:

Posted By: joebobcletusjr
Date Posted: April 11, 2005 at 4:17 PM

I think for this one you should go to JL Audio's website and get the theile small parameters and that will give you the total air displacement of the sub so you can figure that into your box design, unless you are looking for something entirely different like mounting depth, but then again the theile small should tell you that too.

In my opinion, the theile small parameters should be all that you need to give your sub the room that it needs to live.



-------------
eh? what did you just say?



Posted By: 03sdccfx4
Date Posted: April 11, 2005 at 7:14 PM
It has everything but the magnet diameter, I know the airspace and the speaker depth.  I need the magnet diameter, because the box is a wedge and I need the magnet to clear the back of the box.

-------------
'03 F-250 CC Fx4


Print Page | Close Window