no remote wire on a CRX
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54287
Printed Date: June 09, 2024 at 11:52 AM
Topic: no remote wire on a CRX
Posted By: xTimx
Subject: no remote wire on a CRX
Date Posted: April 20, 2005 at 11:38 AM
well i have all my stereo system components installed into my new 90' honda crx. i installed the deck myself, it is such a beautiful install too. but when i was installing the deck. i noticed that there was no remote turn on lead. so i had to install one myself, and use a toggle switch to turn on my amps from now on. which is kinda annoying, now i have this bluntly looking thing on my dash sticking out. is there anything i can do to have no toggle switch?
-------------
xTimx
Replies:
Posted By: TruckSystem
Date Posted: April 20, 2005 at 11:42 AM
Just find a 12 volt wire that turns on with the vehicle and splice the remote wire into it. I used a fuse spot on my front engine fuse box with an extra 10a fuse near the amp myself and it works fine.
-------------
2003 Chevrolet Silverado Standard Cab ~ Alpine CDA-9851
Diamond Audio D3600.1 ~ 2x Diamond Audio TM310D4
Diamond Audio D3400.4 ~ Diamond Audio Hex S600s
AstroStart RS5204 Remote Start/Alarm
Posted By: LTHLQUICKSILVER
Date Posted: April 20, 2005 at 7:24 PM
Just like TruckSystem said, tap into ANY accessory (turn on) wire and you will be fine. If you want it to be as easy as humanly possible, just tap into the accessory wire (red) that is feeding into the deck itself.
|