vented box in a wedge?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=54509
Printed Date: May 02, 2024 at 5:38 AM
Topic: vented box in a wedge?
Posted By: mini14
Subject: vented box in a wedge?
Date Posted: April 23, 2005 at 10:42 PM
has anyone made a vented box in a wedge? i want to use all the space i can an a wedge would do just that. any help?
Replies:
Posted By: stevdart
Date Posted: April 23, 2005 at 10:57 PM
Not much more difficult than a standard rectangular box. You know about the wedge calculators on this site, left column under "volume calculators"?
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: mini14
Date Posted: April 23, 2005 at 11:46 PM
well yea i saw that and calculated internal volume, but i was wondering about the vent. this will be my first box and i want it to downfire. would the vent face down? how would you all recommend making this box?
Posted By: jeffchilcott
Date Posted: April 24, 2005 at 12:13 AM
leave enough space at the bottome of the box between the floor to equal the port diameter minimun, besdies that all is the same, you might want to check one of the sage calculators to make sure your sub is appropiate for downward firing
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|