Print Page | Close Window

1975 Corvette audio solution?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=58174
Printed Date: June 03, 2024 at 9:06 AM


Topic: 1975 Corvette audio solution?

Posted By: 75Vette
Subject: 1975 Corvette audio solution?
Date Posted: June 21, 2005 at 11:22 PM

I would like to put an in dash reciever in my 1975 Corvette.  However, according to Crutchfield, the only unit that would fit would be a Sanyo tape player that requires trimming the dash anyways.

So, are there any solutions to replacing the stock "Spark-o-matic" with a deck?  Its obviously possible, but I'm just not sure how much work/trouble I'd be getting myself into with making mounting brackets, trimming the dash panel, and/or fiberglassing. 

I would also like to keep this relatively inexpensive.

Thanks for your help.




Replies:

Posted By: tcss
Date Posted: June 22, 2005 at 11:21 AM
There is a company called Custom Autosound that modifies old Kenwood shaft decks to perfectly fit classic cars. Get the model KNW-801, it has high power, RCA outputs and changer controls. Stay away from there house brand "USA" stuff. www.custom-autosound.com.


Print Page | Close Window