Print Page | Close Window

amp specs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59443
Printed Date: May 23, 2024 at 4:25 AM


Topic: amp specs

Posted By: theconartist
Subject: amp specs
Date Posted: July 14, 2005 at 7:47 PM

i have a kicker amp and the specs are 100w x 2 at 2 ohms and 200w x 1 at 4 ohms, and i have two dvc 4ohm subs how do i hook these up to get the 200w x 1, Thanks. Cole.



Replies:

Posted By: stevdart
Date Posted: July 14, 2005 at 8:38 PM

posted_image

see https://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=42



-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.



Posted By: theconartist
Date Posted: July 15, 2005 at 3:48 PM
do you have to have an amp that has a 1 ohm load to run the 1 ohm load, stupid question, huh lol, but i hear if you want the spl's people run the 1 ohm load. Whats the difference between the 1, 2, 4, 8 ohm's. Thanks.



Posted By: boulderguy
Date Posted: July 15, 2005 at 4:39 PM
About the amp - yes, you do or you'll cook the sucker. 

-------------


Print Page | Close Window