Print Page | Close Window

1995 Ford Probe SE Factory Wiring Diagram

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=59638
Printed Date: May 04, 2024 at 2:27 PM


Topic: 1995 Ford Probe SE Factory Wiring Diagram

Posted By: PeteyP
Subject: 1995 Ford Probe SE Factory Wiring Diagram
Date Posted: July 18, 2005 at 1:30 PM

I am trying to install a Sony Explod deck in my 1995 Ford Probe SE, and I am having a lot of difficulty doing so. My problem is that I do not know which factory speaker wire is which. If anyone can help me out with a wiring diagram or color code for the factory speaker wires, I'd really appreciate it. Thanks.



Replies:

Posted By: Blowntweeters
Date Posted: July 18, 2005 at 1:57 PM

there is a section of this site that has that diagram



-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700




Posted By: Blowntweeters
Date Posted: July 18, 2005 at 2:07 PM

i take back my first post  try using a battery pack from a drill and some wire  and pop the speakers to find which speaker is for what set of wires



-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700




Posted By: PeteyP
Date Posted: July 18, 2005 at 5:08 PM
can u tell me what section that is in?




Posted By: Blowntweeters
Date Posted: July 18, 2005 at 5:38 PM
go to the top of the page and click on diagrams the click on vehicle wiring but  it does not have the speaker wire listing says N/A you can try www.installdr.com  do you have the power , ground,and switched power hooked up?

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700




Posted By: Blowntweeters
Date Posted: July 18, 2005 at 5:48 PM
https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1995-97&make=Ford&model=Probe&ID=17839&type=Stereo

-------------
1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700




Posted By: ds1434
Date Posted: July 18, 2005 at 10:37 PM

your car probably has the factory installed amplifier behind the passenger rear speaker

do your so called speaker leads have a gray sheathing around all the tiny 20 ga. wires or are your speaker leads about 16 ga and just all separate wires??

it seems as if pretty much every probe around that year had a stinkin amp in it and I just take the rear speaker out and bypass the amp using a BHA5513 from BEST HARNESS and just wire the front up with a BHA5511 and go

now if this is your case just pm me and i'll give you the wire colors for up front b/c it sounds like someone has chopped you plug off your wiring so.................

any questions let me know and i'll help ya out

later



-------------
TechHead





Print Page | Close Window