Concept CD 2410

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=63737
Printed Date: May 20, 2024 at 1:06 PM

Topic: Concept CD 2410

Posted By: 93Drift
Subject: Concept CD 2410
Date Posted: October 03, 2005 at 7:33 PM

so i just bought this amp last week and looking through the manual and on concepts website i cant find how to run the amp in 4 ohm, 2 ohm or 1 ohm....i mean, which positive and negative terminals do i hook up to, also, has anyone used this amp and what are your feelings toward it, thanks for any constructive input

graham

Replies:

Posted By: DYohn
Date Posted: October 03, 2005 at 9:08 PM

93Drift wrote:

so i just bought this amp last week and looking through the manual and on concepts website i cant find how to run the amp in 4 ohm, 2 ohm or 1 ohm....i mean, which positive and negative terminals do i hook up to, also, has anyone used this amp and what are your feelings toward it, thanks for any constructive input
graham

You don't "run" an amp in any "ohm." You connect your speakers to it and the speakers create the ohm load. The amp does not care. What are your speaker(s) and what impedence are the voice coils?

-------------
Support the12volt.com

Posted By: 93Drift
Date Posted: October 03, 2005 at 10:30 PM

i would like to run 2 dvc 10's with dual 4 ohm voice coils, thanks